Mechanical seals and other equipment due to prolonged high torque mechanical movement, gear box backlash becomes large, resulting in greater noise and vibration equipment. Coupled with the long-term sealing parts at high speed, high temperature operation, the oil leakage occurred when the sealing area. Resulting in leakage sealing parts for the following reasons: 1, seal quality problems of leakage; 2, improper lubrication management, resulting in starvation of oil to add ultra-bit or dry grinding; 3, the repair process seal damage caused by seal failure; 4, the oil level vent blockage leads to excessive pressure and the like; more problems not only affect the safe operation of continuous production equipment ISW80-100IA mechanical seal, while resulting in a significant cost of doing business consumption. [1] mechanical seal Note: 1. General mechanical seal is suitable for clean, non-suspended particles of the medium, therefore, the newly installed management systems, and liquid filling, should be carefully rinse the mechanical seal to prevent solid impurities into mechanical seal face seal failure. 2. In the crystallization medium, the use of mechanical seals, pay attention to regular wash. After the re-start before the pump stops, the crystallization to the mechanical seal on the clean. 3. Remove the mechanical seal carefully, and not hands-cone, iron and other percussion ISW80-125I mechanical seal to avoid damaging static ring sealing surface. 4. If there is dirt dismantle down when ISW80-100A mechanical seal, do not force to dismantle, should seek to remove dirt, rinse, and then disassembled, to avoid damage to the sealing element. 5. Before the installation of mechanical seals, sealing elements should check that all have failed, corrupted, if you restored or updated components. 6. The inspection should be strictly ring and stationary ring seal face of grinding, does not allow any minor scratches and bruises and other defects. All parts, including pump body, impeller, sealed chamber, etc. should be clean prior to assembly. Especially the movement ring face with a clean, soft cloth and cotton yarn carefully wipe clean, and then coated with a layer of clean grease or oil. ISW80-100I mechanical seals, mechanical seals, circulating pump provided by the Anguo City Pump Co., Ltd. Shi Yuan. Anguo Shi Yuan Pump Co., Ltd. (www.shiyuanbeng.com) strong, credible, in Baoding centrifugal pump industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Shiyuan water pump into the brilliant and you work for a better future!