Installation location requirements in order to ensure stable operation of mechanical seals, long life and low leakage performance, it would be correctly installed on the machine is very important. It must consider when you install: 1, confirmed member of the mechanical seal is installed on the machine prior to installation and assembly drawing nice contrast to confirm that the part is ready to complete, this time to pay attention to the sealing surface of the seal friction deputy , seals, etc. Have wounds, defects and other anomalies, but also pay attention to the packing and sealing ring (O ring), and other contact with the shaft or sleeve surface, flanges and other parts for scars, if found to have abnormal phenomenon It must be replaced or repaired before use. For actual installation 3 / 2D-HH mechanical seal, do not exceed the required parts to the site, this 3 / 2C-AH mechanical seal, if the remaining parts after installation, it is with the missing equipment when installing place ; if the parts shortage, it means unnecessary places on the assembly of parts, which also plays a role when you install the self-test. (Some people think that a good worker is not required assembly drawings and other markers 1.5 / 1C-HH mechanical seal, this is wrong. It was just a journeyman, he is not a good maintenance worker) 2, the installation location of the installation with mechanical seal type essentials , the type of machine varies. Not repeat them here. Multistage centrifugal pump mechanical seal installation: To master the mechanical seal repair and maintenance, you must first know the mechanical seal works. Mechanical seal is made up of two sealing elements (static ring and ring) perpendicular to the axis, smooth and flat surface bonded with each other, and sealing means constituted for relative rotation. It is produced by the pressure of the sealing medium appropriate pressing force on the rotating ring together stationary ring contact surfaces (end), so that the two end faces closely, maintain liquid film between the end face of an extremely thin and to seal purposes. This layer of liquid, so that between the shaft seal is always in good condition. (5) The overhaul is better than not split well. Once the mechanical seal leakage will appear eager to overhaul, in fact, sometimes sealed and not damaged, just adjust the working conditions or the appropriate adjustments to seal leaks can be eliminated. This will not only avoid waste, and can develop their own fault judgment, the accumulation of maintenance experience, improve maintenance quality. Mechanical seals | 1.5 / 1B-AH mechanical seal | slurry pump mechanical seal (certification) by Anguo City Pump Co., Ltd. Shi Yuan. Anguo Shi Yuan Pump Co., Ltd. (www.shiyuanbeng.com) is specialized in "IS centrifugal pumps, XA centrifugal pump, BA centrifugal, B-type centrifugal pump, double suction centrifugal pump" of the enterprise, the company adhering to the "honesty, hard service "concept, to provide you with the highest quality products and services. Welcome to inquire! Contact: Geng wheat.