D-type multi-stage centrifugal pump Product Overview: D-type multi-stage centrifugal pumps 200D-43X7 multi-stage centrifugal pump for conveying water and physical and chemical properties similar to water or liquids. The pump head is 19-245.7m, a flow rate of 18 to 162m3 / h. The maximum temperature of the liquid does not exceed 80 ℃, widely used in mining drainage, factories and urban water supply purposes. Water or physical and chemical properties of D-type multi-stage centrifugal pump for conveying solid particles, the temperature is below 80 ℃ is similar to water 200D-43X2 multi-stage centrifugal pumps for mining and urban water supply and drainage pumps use DF for transport -20 ℃ ~ 105 ℃, without solid particles, imports corrosive liquids, the pump allows the pressure of 0.6MPa DM-type pump for conveying solid particles content not more than 1.5% neutral mineral water (particle size less than 0.5 mm ) and other similar sewage transmission medium temperature is not greater than 80 ℃, suitable for steel mills, mine drainage, sewage, transportation and other occasions. Should D6-25x3D6-25x4D6-25x5D6-25x6D6-25x7D6-25x8D6-25x9D6-25x10D6-25x11D6-25x12D12-25X3D12-25X4 Installation Note: 1, horizontal centrifugal pipeline installation weight shall not added to the pump, due their support, so as to prevent deformation of performance and longevity. 2, pump and motor are integral structure, when installed without alignment, so very easy to install. 3, you must tighten the bolt installation 200D-43X9 multi-stage centrifugal pumps, so as not to affect performance at the start of the vibration of the pump. 4, installation of pumps should be carefully checked before the pump runner whether the impact of a hard object pump operation (such as stone, iron tablets, etc.), so as not to damage the pump impeller and the pump is running. 5, in order to facilitate the maintenance and use of safety in the import and export pipeline pumps, the installation of a valve near the outlet of the pump and a pressure gauge installed to ensure operation within the rated head and flow, ensure the normal operation of the pump, increase The service life of the pump. 6, horizontal centrifugal pumps for suction occasion multistage centrifugal pump, should be fitted with a foot valve and inlet pipeline should not have too many corners, but may not have water leakage phenomenon. 7, such as the discharge line check valve should be installed outside the gate. 8. After installing toggle shaft, impeller due friction sound or stuck phenomenon, or should check the pump apart cause. 9, installation of horizontal centrifugal pumps into rigid coupling and flexible coupling installation. D46-50X10D46-50X11D46-50X12D85-45X2D85-45X3D85-45X4D85-45X5D85-45X6D85-45X7D85-45X8 200D-43X9 multi-stage centrifugal pumps | wear multi-stage pumps | multistage centrifugal pump provided by the Anguo City Pump Co., Ltd. Shi Yuan. Anguo Shi Yuan Pump Co., Ltd. (www.shiyuanbeng.com) located in Hebei Province Road King Industrial Zone Anguo pump. Scraps and development in the wave of market economy, the current Shiyuan water pump has a high profile in centrifugal pumps, and enjoys a good reputation. Shiyuan water pump made whole network business alliance certification, marking our service and management level has reached a new height. Shiyuan Pump staff is willing to common development with all people a better future.